Before Operating - Panasonic KX-TD500 User Manual

4.1
What kind of telephone do you use?
In this manual, you will find your way to operate the feature depending on the
telephone you use. Please use the proper operation for your telephone.
If you use single line devices such as a single line telephone or data terminal, you will
follow the steps which enter the feature number.
• If you use a dial pulse (DP) type single line device which does not have the " " and
"#" keys, it is impossible to access features that have " " or "#" in their feature
numbers.
• When the "Pickup Dialing (Hot Line)" feature is set on your telephone, the dialing
sequence should be done within a certain period of time (Pickup Dial Waiting Time
— default: 1 s) after lifting the handset.
This time can be changed by System Programming.
If you use a Panasonic proprietary telephone which has the special function button
and/or the display, you will follow the operation with the button or display for easy
access.
• If you use a Panasonic proprietary telephone which does not have the function
button, you may change one of the unused buttons to another button. Refer to the
Station Programming (Section 2.2).
• A Panasonic proprietary telephone has the Light Emitting Diode (LED) button
indicators, so you can see the line conditions by the lighting patterns.
• If "Idle Line Preference — Outgoing," "No Line Preference — Outgoing" or "Prime Line
Preference (CO Line) – Outgoing" is assigned on the extension, it is not possible to have
access to any DPT features after simply going off-hook. To access DPT features, press
the INTERCOM (ICM type PT) or PDN button (DN type PT) directly or after going off-
hook.
Refer to "BUTTON, LINE ACCESS – SUMMARY" in the Features Guide for further
information on "ICM type PT" and "DN type PT."
4-2
Station Features and Operation

Before Operating