Released Link Operation - Panasonic KX-TD500 User Manual

4.3 Station Features and Operation

Released Link Operation

When Released Link Operation is enabled by System Programming, you will be
automatically released from a call (extension, outside) after transferring it to the
destination, if the destination extension is idle. This feature simplifies the transfer
operation by eliminating the need for going on-hook or pressing the RELEASE button
after transferring the call.
This feature is convenient for extension users, such as Operators, who handle a large
volume of calls.
PT and SLT
During a conversation;
TRANSFER
For PT:Press TRANSFER.
For SLT: Flash the switchhook.
• The other party is placed on
consultation hold.
Conditions
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• Released Link Operation functions when transferring a call to the ordinary extensions
or floating extensions (extension group, phantom extensions).
• If the destination party is busy, Camp-on Transfer is set by going on-hook.
• The SLT extension user cannot establish a conference call, if "Released Link
SLT
Operation" is enabled by System Programming.
Programming References
• System Programming — Installation Manual, Section 4
4.2.3 System - Class of Service
Feature References
None
For PT
For SLT
Confirmation tone
and dial tone
— Released Link Operation
• Ringing starts at the destination extension.
• The call is transferred.
Station Features and Operation
extension no.
Dial the destination
extension number
(3 or 4 digits).
R
4-175