Panasonic KX-TD500 User Manual page 129

A
Alternating (to Ring-Calling mode)
Any Telephone
If the extension you are calling is in Voice-Calling mode, you hear a confirmation.
Conditions
• Voice-signaling is not available in the following cases:
—if the other extension is an SLT.
—if the other extension is busy on another call.
—if another call is ringing on the other extension.
• One time switching
You can switch the desired calling mode only once during a call.
• If the party you are calling is using a single line telephone (SLT), only Ring-Calling
mode is available.
PT • Mode Selection
You can select either to be ring-signaled or voice-signaled by Station Programming.
The default is Ring-Calling mode.
Programming References
• Station Programming (Section 2)
Intercom Alert Assignment
Feature References
Hands-free Answerback
Inter Office Calling
4-14
Station Features and Operation
4.3 Station Features and Operation
Dial . Ringback tone
• Ring-Calling mode is established.