Panasonic KX-TD500 User Manual page 222

4.3 Station Features and Operation
PT
• DSS Button
DSS buttons permit One-Touch access to an extension and provide Busy Lamp Field.
PT • You can assign a DSS button on a proprietary telephone (PT) or DSS Console by
Station, User or System Programming.
• Definition of extension busy status
— Off-hook
PT(ICM)
— ICM button is not idle
— There is no idle DN buttons on a PT
PT(DN)
— Off-hook
— While engaged in a call
— Off-hook
SLT
— an SLT is ringing
— an SLT has a call placed on hold
display PT
• Extension Names can be given to all extensions by User or System Programming. An
extension number and a name, if programmed, are shown on the display PT during an
intercom call.
• Call Directory - Extension Dialing
With the KX-T7431, KX-T7433, KX-T7436, or KX-T7235, you can make an extension
call using the "Call Directory - Extension Dialing" display operation.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — DSS Button
• User Programming (Section 3)
[004] Extension Name Set
[005] Flexible CO Button Assignment
• System Programming — Installation Manual, Section 4
4.1.3 Configuration - Extension Port Assignment
4.2.1 System - Tenant
4.2.2 System - Numbering Plan
4.4.2 Line - Extension Line
4.4.3 Line - DSS Console
— Attribute
— Tel. Type
— DN
— Group No.
— Inter - tenant Calling
— 1st through 16th Hundred Block Extension
— Name
— Flexible CO Key Assignment
— Flexible DSS Key Assignment
Station Features and Operation
I
4-107