Panasonic KX-TD500 User Manual page 237

M
Clearing all message notifications left on your extension
PT and SLT with Message Lamp
Lift the handset or
press
SP-PHONE/MONITOR.
Conditions
• The system supports a maximum of 448 simultaneous message notifications. If you
try to set the 449th message, you will hear a reorder tone.
• Call back Order
If multiple message notifications are left at your extension, callback is executed in the
order received.
• If you select a specific message to call back, callback is executed in the order
received, starting with the one selected.
• Hardware Requirements
To utilize the SLTs with Message Lamp, an MSLC card (KX-T96175) or an ESLC
card (KX-TD50175) is required.
• Turning off the light
Either the message sender or the receiver can turn off the light.
• Messages are always left on the first called extension. It is not sent to a Call
Forwarding or Station Hunting destination.
PT
• MESSAGE button
If a MESSAGE button is not provided on a PT, a flexible CO/DSS button can be
assigned as the MESSAGE button by Station, User or System Programming.
PT
• VPS Integration
If VPS Integration is employed, a VM extension informs an extension that a message
is left in his/her mailbox by turning on the MESSAGE lamp.
The extension user can listen to the message in the mailbox simply by pressing the
red lit MESSAGE lamp.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can set or cancel this
feature using the display operation.
• Distinctive Dial Tone
Distinctive Dial Tone is sent to the user on the extension with this feature when the
extension user goes off-hook.
4-122
Station Features and Operation
4.3 Station Features and Operation
7
Dial tone 4. Dial 700.
0 0
your extension no.
Dial your extension
number.
• All message notifications are cleared.
Hang up or press
SP-PHONE/MONITOR.