External Modem Control - Panasonic KX-TD500BX User Manual

Station Features and Operation (PT/SLT)

4.3.36 External Modem Control

Allows you to control the external modem, connected to the RS-232C port 1 by sending a pre-
assigned AT Command (for enabling Automatic Answer, etc.).
Activating an AT Command to the RS-232C port 1
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• An AT Command can only be programmed by Serial Interface/remote programming
software.
• For more information about the AT Command, please refer to the modem instructions.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming Guide References
• 2.3 Numbering Plan
– MODEM Control
• 10.2 External Modem 1/2
– Manual Initialization Command (1-5)
– Automatic Initialization Command
• 10.3 External Modem 2/2
– Connection Message (1-5)
– Disconnection Message (1-5)
• 10.6 System Parameters
268
7 9 1
AT Command no.
Dial 791.
Enter the AT Command
number (1 through 5)
-1: for Command 1
-2: for Command 2
-3: for Command 3
-4: for Command 4
-5: for Command 5
<PT Display Example>
MODEM command X
Hang up or press
Confirmation tone
SP-PHONE/MONITOR .
and dial tone
AT Command number
User Manual