Before Operating The Telephones - Panasonic KX-TDA30 User Manual

1.1 Before Operating the Telephones

1.1 Before Operating the Telephones
1.1.1 Before Operating the Telephones
What Kind of Telephone Can Be Used?
You can use a single line telephone (SLT), such as a rotary pulse telephone or a Panasonic proprietary
telephone (PT) such as the KX-T7636 or KX-NT136. You can also use a Panasonic Portable Station (PS)
such as the KX-TCA255 or KX-TD7690. Use the feature depending on the telephone you are using. If you
are using a Panasonic proprietary telephone with a special feature button such as
(Display PT) or both, you can follow the operation with the button or display messages for easy
programming.
If you use a large display telephone (e.g., KX-T7636), you can follow the displayed messages to use the
features. If your telephone does not have feature buttons and/or a display, you may operate the PBX by
entering a feature number instead. Follow the operation for your type of telephone.
If you use a Console, you can use the buttons on the Console as the buttons on the connected proprietary
telephone.
Registration for Your Portable Station (PS)
Your PS must be registered with the PBX and assigned an extension number before initial use, through
system programming. To confirm the extension number of your PS, refer to "Your extension information" in
Section "3.1.2 Settings on the Programming Mode".
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if
required).
There are two types of feature numbers as follows:
• Flexible feature number
• Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other numbers
for easier use. In this manual, the default numbers (factory installed) are used for operations.
A flexible number is shown as
changed the feature number. Write the new number in "4.2.1 Feature Number Table" (Appendix).
Notice
The default value of a flexible feature number may vary depending on country/area.
14 User Manual
•
(half-shaded key). Use the new programmed number if you have
If you use a Panasonic proprietary
telephone which does not have feature
buttons, you may change one of the unused
flexible buttons to a feature button. Refer to
"3.1.3 Customising the Buttons".
REDIAL
or a display