Table of Contents
Advertisement
The delivery destination
The delivery destination
Introduction
There are four factors that can influence the delivery destination of the printed output.
The media profile of the media you use.
1.
Some media profiles require a specific output delivery. If the correct media profile is available
on your printer operator panel, the Océ ColorWave 650 Poster Printer automatically selects
the correct output delivery.
If the correct media is not available on your printer operator panel, you can download the
media profile from the Océ website (see
page
254) and install the media profile to the 'Océ PowerM Plus controller ' (see
media profile' on page
The media roll core size of the media you use.
2.
The 'Sheet delivery' setting that you defined in the Océ Express WebTools.
3.
To set the default 'Sheet delivery', select the 'Preferences' - 'Print job defaults' tab.
When you define print job settings in the printer drivers or the job submission tools, these
4.
values always overrule the default values defined in the Océ Express WebTools.
Note:
If your output is delivered through the 'External output (back)' (even if you set the 'Top
delivery tray' as output location for your prints), please check whether Roll-to-Roll mode
is enabled since Roll-to-Roll mode forces a 'Sheet delivery' through the 'External output
(back)'.
[179] 'Sheet delivery' in Océ Express WebTools
166
Chapter 5 - Use the printing system
'Download a media profile from the Océ website' on
255).
'Install a
Hide quick links:
Advertisement
Table of Contents
