Terminal (Menu); Remote Port (Menu); Tcp/Ip (Menu) - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Satellite Modem
4.4.6.3

TERMINAL (menu)

TYPE {VT-100, WYSE50, VIEWPOINT}
BAUD RATE {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200}
4.4.6.4

REMOTE PORT (menu)

ADDRESS {32 - 255}
BAUD RATE {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38,400,
57600, 115200}
INTERFACE {RS-232, RS-485}
4.4.6.5

TCP/IP (menu)

TCP/IP MENU
BOOT MODE {DEFAULT, NON-
VOL, BOOTP,
IP TEST}
MN-DMD2050E Revision 2
DEFAULT: During initialization (boot up), the modem will restore the
web setting to the standard IP Mask and addresses supplied by the
modem. The modem will be taken off the network and will not be
accessible. The Default settings are:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTP: During initialization (boot up), the modem will get the names,
masks, and IP Addresses of the modem, router, and server.
NON-VOL: Stores and uses IP Mask and addresses as provided by
the user.
IP TEST: Stores and uses IP Mask and addresses to fixed settings as
listed below.
Bootp Server Tag:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
Select the emulation type.
Enter the terminal baud rate.
Enter the Remote Port Multidrop
Address.
Enter the Remote Port Baud Rate.
Enter the Remote Port interface
type.
255.000.000.000 (FF.00.00.00 hex)
010.000.000.001 (C0.A8.00.EE hex)
010.001.001.001 (0A.01.01.01 hex)
010.000.001.001 (0A.00.01.01 hex)
206
255.255.255.000 (FF.FF.FF.00 hex)
192.168.0.238 (C0.A8.00.EE)
192.168.000.101 (C0.A8.00.65)
192.168.000.102 (C0.A8.00.66)
User Interfaces
4–29