Ip Address; Web Interface Security; Default User Accounts; D.2.2 Ip Address - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Satellite Modem

D.2.2 IP Address

IMPORTANT
Before you set an IP address, contact the IT authority in your organization for help.
The BOOT MODE setting controls access to the IP address for the unit. The unit is shipped from
the factory with the BOOT MODE set to DEFAULT (a fixed address that is not accessible).
To access the unit through the Ethernet port, set the Boot Mode to IP TEST (a fixed IP address
that is accessible).
To use an alternate IP address, change the BOOT MODE to NON-VOL. You can program NON-
VOL to any valid IP address.

D.3 Web Interface Security

Access rights and authentication parameters are stored in the web user database. Anyone who
uses the web interface must have a user account in the web user database. A user account
contains four parameters:
User ID
•
Access Group
•
Authentication Password
•
Web User
•

D.3.1 Default User Accounts

Initially, the web user database contains three factory-default user accounts. The parameters in
those accounts are:
USER ID
USER 1
USER 2
USER 3
MN-DMD2050E Revision 2
Access Group Authentication Password
GUEST guest
OPER oper
ADMIN admin
Web Browser Setup Guide
Web User
guest
oper
admin
D–2