Comtech EF Data DMD-2050E Installation And Operation Manual page 124

DMD2050E Universal Satellite Modem
LOCAL AUPC MENU
TARGET Eb/No
TARGET Es/No
TRACKING RATE
LOCAL CL ACTION
REMOTE CL ACTION
MN-DMD2050E Revision 2
{4.0 to 16 dB}
{1.0 to 25 dB}
{0.5 to 6.0}
{HOLD, NOMINAL,
MAXIMUM}
{HOLD, NOMINAL,
MAXIMUM}
Set the desired E /N for the local receiver.
b o
RADYNE AUPC: When configured for Radyne AUPC, this
setting is compared against the remote E
to the local modem to increase or decrease the local transmit
power.
EF AUPC: When configured for EF AUPC, this setting is
compared against the local received E
the remote modem to increase or decrease transmit power.
NEARSIDE: When configured for NEARSIDE AUPC, this
setting is compared against the received E
modem and commands to the local modem to increase or
decrease transmit power.
Set the desired E /N for the local receiver.
s o
EBEM AUPC: When configured for EBEM AUPC, this setting
is compared against the remote E
local modem to increase or decrease the local transmit
power.
Set the rate at which the commands to increase or decrease
Transmit Power are sent. Each command will result in a 0.5
dB increase or decrease in Transmit Power from the remote
transmitter. The tracking rate is adjustable from 0.5 dB per
minute to 6.0 dB per minute in 0.5 dB steps. (Only available
when EFAUPC is selected as the framing)
Set the Remote Transmit Power Setting to be used when the
local modem receiver loses lock. The setting can be 'HOLD'
(no action taken), 'NOMINAL' (the nominal Transmit Power
Setting is used), and 'MAXIMUM' (the maximum Transmit
Power Setting is used). (Only available when EFAUPC is
selected as the framing)
Set the Local Transmit Power Setting to be used when the
remote modem receiver loses lock. The setting can be
'HOLD' (no action taken), 'NOMINAL' (the nominal Transmit
Power Setting is used), and 'MAXIMUM' (the maximum
Transmit Power Setting is used).
User Interfaces
/N and commands
b o
/N and commands to
b o
/N of the local
b o
/N and commands to the
s o
4–12