Features (Menu); Upgrade List (Menu) - Comtech EF Data DMD-2050E Installation And Operation Manual

DMD2050E Universal Satellite Modem
CNC BOARD (menu)
DEBUG MODE
CNC DEBUG REGS1
CNC DEBUG REGS2
CNC DEBUG REGS3
CNC DEBUG REGS4
SCALE AMPLTD
AR THRESH FACTOR
PLL LOOP THRESH
ACQ CNTR THRESH
PLL LOOP GAIN
4.4.6.10.2

FEATURES (menu)

5012.2840.2417 {____.____.____}
4.4.6.10.3

UPGRADE LIST (menu)

UPGRADE LIST MENU
10 MBPS, 20 MBPS, 52 MBPS (The highest option installed hides the lower rates.)
52 MBPS
TURBO 52 MBPS
RXIF
TXIF
RXLBAND
TXLBAND
RS
RS CUSTOM
DVB
MN-DMD2050E Revision 2
Indicates the part number for the CNC Board.
{ENABLED, DISABLED}
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Installs purchased feature upgrades (see Appendix A).
Whether or not the feature has been upgraded, or if the feature requires a
hardware upgrade (contact the Customer Service Department or Sales for
hardware and software upgrades).
IBS
IDR
D&I
ENH ASYNC
AUPC
EDMAC
OM73 SCRAMBLIN
SEQ
8PSK
16QAM
TPC 7/8 SHORT
ETHERNET WAN MONITOR
8QAM
LDPC 52 MBPS
CNC 52 MBPS
EBEM
LOW TX POWER
User Interfaces
4–35