Soft Keys; Key Assignment - Standard Horizon HX890 Owner's Manual

13.8 SOFT KEYS

Use this menu to make soft key assignments and to set how long the display
will show the soft key icon after a soft key is pressed.

13.8.1 Key Assignment

Press and hold

key
1. Select "KEY ASSIGNMENT" with the
[CH▼]/[CH▲] key, then press the [SELECT]
soft key.
2. Press the [CH▼]/[CH▲] key to select the
key number to be programmed, and press
the [SELECT] soft key.
3. Press the [CH▼]/[CH▲] key to select a new
function to be assigned to the soft key, and
press the [ENTER] soft key. Available func-
tions are listed below. By selecting "NONE"
the soft key assignment is removed.
4. Repeat steps 2 and 3 to program other soft
keys. Choose from the 18 functions that may
be assigned.
5. Press the [CLR] key to return to radio operation.
DISPLAY
NONE
TX/PWR
WX/CH
SCAN
DUAL WATCH
WPT MARK
COMPASS
WAYPOINT
MOB
SCAN MEMORY
PRESET
STROBE
CH NAME
LOGGER
NOISE CANCEL
FM RADIO
BACKLIT
78
CONFIGURATION

( / key)
FUNCTION
Changes transmit power.
Switches channels between weather and marine.
Turns scanning function ON or OFF.
Turns dual or triple watch scan function ON or OFF.
Marks the current position for a "Waypoint".
Enables the "Compass" display.
Enables the Waypoint Navigation.
Marks the position where a person falls overboard.
Add or remove channels from memory channel scan.
Programs or deletes the preset memory channel.
Turns the strobe light LED ON or OFF.
Edit channel names.
Starts and stops logging position data.
Enables the noise canceling settings display.
Starts the FM Broadcast radio receiver.
Enables the Display Mode.
SELECT
SOFT KEY

( key) (
CONFIGURATION
SOFT KEY
KEY ASSIGNMENT
KEY TIMER
BACK
CONFIGURATION
KEY SELECTION
DUAL WATCH
BACK
–

/ key) (
CONFIGURATION
KEY ASSIGNMENT
1:WX/CH
SELECT
2:DUAL WATCH
3:FM RADIO
4:TX PWR
5:MOB
NONE
BACK
TX PWR
WX/CH
SCAN
ENTER
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
4
1 (HX890)
7
2
12
8
5
6
1 (HX890E)
10
11
9
3
SELECT
key)
SELECT