Auto Dsc Polling; Selecting Stations To Be Automatically Polled Tracked - Standard Horizon MATRIX GX2100 Owner's Manual

11.11 AUTO DSC POLLING

The GX2000/GX2100 has the capability to automatically track four stations
programmed into the Indvidual directory.
The following procedure allows the time interval between position requests to
be setup.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
3. Press the [ SELECT ] soft key, then select
"AUTO DSC INTERVAL" with the CHANNEL
knob.
4. Rotate the CHANNEL knob to select the de-
sired interval time (1,2,3,4,5,10,30 and 40 minutes)
and press the [ ENT ] soft key.
5. Press the [ QUIT ] soft key numerous times to exit to
the radio mode.

11.11.1 Selecting Stations to be Automatically Polled tracked

The radio uses the Individual directory to select stations. Refer to sec-
tion "11.5.1 Setting up the Individual / Position Call Directory" and to
enter MMSI of stations you want to poll before proceeding.
1. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
2. Rotate the CHANNEL knob to select "AUTO
POS POLLING", then press the [ SELECT ] soft
key.
3. Rotate the CHANNEL knob to select the "SE-
LECT ADDRESS", then press the [ SELECT ] soft
key.
4. The radio will show 4 calling stations to be
selected, select "CALL 1" and press the [ SE-
LECT ] soft key.
5. The radio will show the stations programmed
in the Individual directory. Rotate the CHAN-
NEL knob to select the desired station and
press the [ SELECT ] soft key.
Page 76
NOTE
GX2000/GX2100