Auto Dsc Polling; Selecting Stations To Be Automatically Polled (Tracked) - Standard Horizon Matrix GX2000 Owner's Manual

11.11 AUTO DSC POLLING

The GX2000/GX2100 has the capability to automatically track four stations.
The following procedure allows the time interval between position requests to
be setup.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
SETUP SETUP
SETUP SETUP
3. Press the [ SELECT ] soft key, then select
"AUTO DSC INTERVAL AUTO DSC INTERVAL" with the CHANNEL
AUTO DSC INTERVAL AUTO DSC INTERVAL AUTO DSC INTERVAL
knob.
4. Rotate the CHANNEL knob to select the de-
sired interval time (1,2,3,4,5,10,30 and 40
minutes) and press the [ ENT ] soft key.
5. Press the [ QUIT ] soft key numerous times to exit to
the radio mode.
11.11.1 Selecting Stations to be Automatically Polled ( tracked )
The radio uses the Individual directory to select stations. Refer to sec-
tion "11.5.1 Setting up the Individual / Position Call Directory" and to
enter MMSI of stations you want to poll before proceeding.
1. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
Menu Menu
Menu Menu
2. Rotate the CHANNEL knob to select "AUTO
POS POLLING", then press the [ SELECT ] soft
POS POLLING POS POLLING
POS POLLING POS POLLING
key.
3. Rotate the CHANNEL knob to select the "SE-
LECT ADDRESS", then press the [ SELECT ] soft
LECT ADDRESS LECT ADDRESS
LECT ADDRESS LECT ADDRESS
key.
4. The radio will show 4 calling stations to be
selected, select "CALL 1
LECT ] soft key.
5. The radio will show the stations programmed
in the Individual directory. Rotate the CHAN-
NEL knob to select the desired station and
press the [ SELECT ] soft key.
6. Repeat steps 4 and 5 for CALL 2, CALL 3 and CALL
Page 72
NOTE
CALL 1" and press the [ SE-
CALL 1 CALL 1 CALL 1
DSC DSC DSC
DSC
DSC DSC
DSC DSC
AUTO AUTO AUTO AUTO
SE- SE-
SE- SE-
GX2000/GX2100