Preset Channels: Instant Access - Standard Horizon HX890E Owner's Manual

8.9.3 Memory Scanning (M-SCAN)
1. Set the scan type to "MEMORY" in the CH SETUP menu (refer to "8.9.1
Selecting the Scan Type").
2. Press the SQL key, then press the [CH▼]/[CH▲] key until background
noise disappears.
3. Press the [◄]/[►] key repeatedly, then press the [SCAN]
soft key. "MEM-SCAN" icon appears on the display.
Scanning will proceed from the lowest to the highest
programmed channel number and the preset channel
(described in the next section). Scanning will stop on a
channel when a transmission is received.
The channel number will blink during reception.
4. To stop scanning, press the [SCAN] soft key or [CLR] key.
8.9.4 Priority Scanning (P-SCAN)
1. Set the scan type to "PRIORITY" in the CH SETUP menu (refer to "8.9.1
Selecting the Scan Type").
2. Press the SQL key, then press the [CH▼]/[CH▲] key until background
noise disappears.
3. Press the [◄]/[►] key repeatedly, then press the [SCAN]
soft key. "PRI-SCAN" icon appears on the display. Scan-
ning will proceed between the memorized channels and
preset channel (described in next section) and the priority
channel.
The priority channel will be scanned after each programmed
channel.
4. To stop scanning, press the [SCAN] soft key or [CLR] key.
By default, Channel 16 is set as the priority channel. The priority channel
may be reset to another desired channel by using the SETUP menu.
Refer to section "14.7 PRIORITY CHANNEL".

8.10 PRESET CHANNELS: INSTANT ACCESS

Ten preset channels can be programmed for instant access. Press the [◄]/[►]
key repeatedly, and then press the [PRESET] soft key, to activate the user
assigned channel bank. If no channels have been assigned, an alert beep
will be emitted from the speaker.
Before beginning the Instant Access operation, assign the "PRESET" command
into one of the programmable keys, refer to section "13.8 SOFT KEYS".
28
NOTE
RX USA HI
16
P
MEM-
SCAN
MEM
DISTRESS
LAT 33 ° 37.1200
s
LON 118 ° 09.5822
W
TIME LOC 09:56:56
AM
USA HI
RX
16
P
PRI-
SCAN
MEM
P-SET
DISTRESS
LAT 33 ° 37.1200
s
LON 118 ° 09.5822
W
TIME LOC 09:56:56
AM