Operation; Media Load - Tear-Off (Straight-Through) - Intermec EasyCoder E4 User Manual

Chapter 3

Operation

Media Load – Tear-Off (Straight-through)
1
1
Open the side and front covers.
12
The same loading principles apply to thermal transfer receiving
media as well as direct thermal or LinerLess media. All kinds
of media can be used. However, LinerLess media requires an
EasyCoder E4 LinerLess printer.
Before shipping the printer, always remove any roll from the
HINT!
To facilitate media and ribbon load, you can remove the side cover
by opening it halfway (45°) and lift the hinges out of their pockets
in the bottom moulding.
2
Caution!
media supply roll post.
2
Turn the printhead lift lever counterclockwise to
raise the printhead.
Intermec EasyCoder E4 – User's Guide