Packet Capture Screen - ZyXEL Communications NSG50 User Manual

5.3 Packet Capture Screen

Use this screen to capture network traffic going through the NSG's interfaces. Studying these packet
captures may help you identify network problems. Click Maintenance > Diagnostics > Packet Capture to
open the packet capture screen.
Note: New capture files overwrite existing files of the same name. Change the File Suffix field's
setting to avoid this.
Figure 28 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
Table 15 Maintenance > Diagnostics > Packet Capture
LABEL
Interfaces
Filter
IP Version
Protocol Type
Chapter 5 Maintenance
DESCRIPTION
Enabled interfaces (except for virtual interfaces) appear under Available Interfaces.
Select interfaces for which to capture packets and click the right arrow button to move
them to the Capture Interfaces list. Use the [Shift] and/or [Ctrl] key to select multiple
objects.
Select the version of IP for which to capture packets. Select any to capture packets for
all IP versions.
Select the protocol of traffic for which to capture packets. Select any to capture
packets for all types of traffic.
NSG Series User's Guide
28