Log On Usb Settings: Edit - ZyXEL Communications SBG5500 Series User Manual

Figure 156 Configuration > Log / Report > Log Settings
The following table describes the labels in this screen.
Table 100 Configuration > Log / Report > Log Settings
LABEL
Edit
Multiple Entries Turn
On
Multiple Entries Turn
Off
#
Status
Name
Log Format
Summary
Apply
Reset

13.3.1 Log on USB Settings: Edit

The Edit Log on USB Settings screen controls the detailed settings for saving logs to a connected USB
storage device. Go to the Log Settings screen (see
setting or select it and click Edit to open the following screen.
Chapter 13 Log / Report
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify it.
Select one or more entries and click this to enable them.
Select one or more entries and click this to disable them.
This field is a sequential value, and it is not associated with a specific log.
This field displays whether the log setting is active or not. A green ON signifies that this log
setting is active. A gray OFF signifies that this log setting is not active.
Click the slide button to turn on or turn off the entry.
This field displays the type of log setting entry (system log, logs stored on a USB storage device
connected to the SBG, or one of the remote servers).
This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - Zyxel's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
This field is a summary of the settings for each log.
Click Apply to save your changes.
Click Reset to restore your previously saved settings.
SBG5500/3310 Series User's Guide
219
Section 13.3 on page 218), and double-click the USB