Internet Test Setup; Figure 3-8 Internet Access (Pppoe); Table 3-8 New Fields In Menu 4 (Pppoe) Screen - ZyXEL Communications Prestige 314 PLUS User Manual

FIELD
Encapsulation
Idle Timeout
3.4

Internet Test Setup

After configuring the menu 4 fields when you press [ENTER] to confirm you will see the message, " Do you
wish to perform the Internet Setup Test[y/n]:" if you have chosen PPTP or PPPoE as your encapsulation
method. Say 'Y' to test your setup. An example of Internet Setup Test is shown next.
3-14
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 4 - Internet Access Setup
ISP's Name= myISP
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Idle Timeout= 300
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation = SUA Only
Press ENTER to Confirm or ESC to Cancel:

Figure 3-8 Internet Access (PPPoE)

Table 3-8 New Fields in Menu 4 (PPPoE) screen

Press the [SPACE BAR] and then press [ENTER] to choose
PPPoE. The encapsulation method influences your choices
for IP Address.
This value specifies the time in seconds that elapses before
the Prestige automatically disconnects from the PPPoE
server.
DESCRIPTION EXAMPLE
PPPoE
300
(default)
Internet Access