Add/Edit A Vlan Group - ZyXEL Communications VMG1312-B Series User Manual

The following table describes the fields in this screen.
Table 71 Network Setting > Vlan Group
LABEL
Add New Vlan
Group
#
Group Name
VLAN ID
Interfaces
Modify

14.2.1 Add/Edit a VLAN Group

Click the Add New VLAN Group button in the Vlan Group screen to open the following screen.
Use this screen to create a new VLAN group.
Figure 98 Add/Edit VLAN Group
The following table describes the fields in this screen.
Table 72 Add/Edit VLAN Group
LABEL
VLAN Group
Name
VLAN ID
LAN
Apply
Cancel
Chapter 14 Vlan Group
DESCRIPTION
Click this button to create a new VLAN group.
This is the index number of the VLAN group.
This shows the descriptive name of the VLAN group.
This shows the unique ID number that identifies the VLAN group.
This shows the LAN ports included in the VLAN group and if traffic leaving the port will be
tagged with the VLAN ID.
Click the Edit icon to change an existing VLAN group setting or click the Delete icon to
remove the VLAN group.
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Enter a unique ID number, from 1 to 4,094, to identify this VLAN group. Outgoing traffic is
tagged with this ID if Tx tagging is selected below.
Select Include to add the associated LAN interface to this VLAN group.
Select Tx tagging to tag outgoing traffic from the associated LAN port with the VLAN ID
number entered above.
Click Apply to save your changes back to the Device.
Click Cancel to exit this screen without saving.
VMG1312-B Series User's Guide
196