Dial-In Configuration - Tripp Lite B092-016 Owner's Manual

Chapter 6: Secure SSH Tunneling & SDT Connector
Also some clients are launched in a command line or terminal window. The Telnet client is an example of this:
• Click OK
6.2.8

Dial-in configuration

If the client computer is dialing into Local/Console port on the Console Server, you will need to set up a dial-in PPP link:
• Configure the Console Server for dial-in access (following the steps in the Configuring for Dial-In PPP Access section in
Chapter 5, Configuring Dial In Access)
• Set up the PPP client software at the remote User computer (following the Set up the remote Client section in Chapter 5)
Once you have a dial-in PPP connection established, you can then set up the secure SSH tunnel from the remote Client
computer to the Console Server.
92