Configure The Upstream Nagios Monitoring Host - Tripp Lite B092-016 Owner's Manual
Console server management switch console server with poweralert console server
Hide thumbs
Also See for B092-016:
- Owner's manual (242 pages) ,
- Quick start manual (4 pages) ,
- Specification sheet (3 pages)
Table of Contents
Advertisement
Chapter 10: Nagios Integration
10.3.6 Configure the upstream Nagios monitoring host
Refer to the Nagios documentation (http://www.nagios.org/docs/) for configuring the upstream server:
• The section entitled Distributed Monitoring steps through what is needed to configure NSCA on the upstream server (under
Central Server Configuration)
• NRPE Documentation, which has been recently added, steps through configuring NRPE on the upstream server http://
nagios.sourceforge.net/docs/nrpe/NRPE.pdf
At this stage, Nagios at the upstream monitoring server is configured, and individual serial port and network host connections
on the Console Server are configured for Nagios monitoring. If NSCA is enabled, each selected check will be executed once
over the period of the check interval. If NRPE is enabled, then the upstream server will be able to request status updates
under its own scheduling.
157
- Quick Links:
- Network Connection
- Serial Port Connection
Hide quick links:
Advertisement
Table of Contents
