Make An Sdt Connection Through The Gateway To A Host - Tripp Lite B092-016 Owner's Manual

Chapter 6: Secure SSH Tunneling & SDT Connector
6.2.4

Make an SDT connection through the gateway to a host

• Simply point at the host to be accessed and click on the service to be used in accessing that host. The SSH tunnel to
the gateway is then automatically established, the appropriate ports redirected through to the host, and the appropriate
local client application is launched pointing at the local endpoint of the redirection:
Note: The SDT Connector client can be configured with an unlimited number of Gateways. Each Gateway can be configured
to port forward to an unlimited number of locally networked Hosts. Similarly there is no limit on the number of SDT Connector
clients who can be configured to access the one Gateway. There are also no limits on the number of Host connections that an
SDT Connector client can concurrently have open through the one Gateway tunnel.
However, there is a limit on the number of SDT Connector SSH tunnels that can be open at one time on a particular Gateway.
The B096-016 / B096-048 Console Server Management Switch and B092-016 Console Server with PowerAlert each support
at least 50 such concurrent connections. So for a site with a B096-016 gateway you can have, at any time, up to 50 users
securely controlling an unlimited number of network attached computers, power devices and other appliances (routers, etc) at
that site.
87