Tripp Lite B092-016 Owner's Manual page 110

Chapter 6: Secure SSH Tunneling & SDT Connector
o If your destination computer is serially connected to the Console Server, set the Destination as <port
label>:3389 e.g. if the Label you specified on the serial port on the Console Server is win2k3, then specify the
remote host as win2k3:3389 . Alternative you can set the Destination as portXX:3389 where XX is the SDT
enabled serial port number e.g. if port 4 is on the Console Server is to carry the RDP traffic then specify
port04:3389
Note: http://www.jfitz.com/tips/putty_config.html has useful examples on configuring PuTTY for SSH tunneling
• Select Local and click the Add button
• Click Open to SSH connect the Client PC to the Console Server. You will now be prompted for the Username/Password for
the Console Server user
110