Configure As Server Or Client - Tripp Lite B092-016 Owner's Manual
Console server management switch console server with poweralert console server
Hide thumbs
Also See for B092-016:
- Owner's manual (242 pages) ,
- Quick start manual (4 pages) ,
- Specification sheet (3 pages)
Table of Contents
Advertisement
Chapter 4: Serial Port, Device and User Configuration
4.10.2 Configure as Server or Client
• Complete the Client Details or Server Details depending on the Tunnel Mode selected.
o
If Client has been selected, the Primary Server Address will be the address of the OpenVPN Server.
o
If Server has been selected, enter the IP Pool Network address and the IP Pool Network mask for the IP Pool. The
network defined by the IP Pool Network address/mask is used to provide the addresses for connecting clients.
• Click Apply to save changes
• To enter authentication certificates and files Edit the OpenVPN tunnel.
• Select the Manage OpenVPN Files tab. Upload or browse to relevant authentication certificates and files.
• Apply to save changes. Saved files will be displayed in red on the right-hand side of the Upload button.
60
- Quick Links:
- Network Connection
- Serial Port Connection
Hide quick links:
Advertisement
Table of Contents
