Upgrade Firmware - Tripp Lite B092-016 Owner's Manual
Console server management switch console server with poweralert console server
Hide thumbs
Also See for B092-016:
- Owner's manual (242 pages) ,
- Quick start manual (4 pages) ,
- Specification sheet (3 pages)
Table of Contents
Advertisement
Chapter 11: System Management
11.2 Upgrade Firmware
Before upgrading you should ascertain if you are already running the most current firmware in your gateway. Your Console
Server will not allow you to upgrade to the same or an earlier version.
• The Firmware version is displayed in the header of each page
• Or select Status: Support Report and note the Firmware Version
• To upgrade, you must first download the latest firmware image from
http://www.tripplite.com/EN/support/downloads/driver-firmware-downloads.cfm
• Save this downloaded firmware image file on to a system on the same subnet as the Console Server
• Also download and read the release_notes.txt for the latest information
• To then upload the firmware image file to your Console Server, select System: Firmware
• Specify the address and name of the downloaded Firmware Upgrade File, or Browse the local subnet and locate the
downloaded file
• Click Apply and the Console Server appliance will undertake a soft reboot and commence upgrading the firmware. This
process will take several minutes
• After the firmware upgrade has completed, click here to return to the Management Console. Your Console Server will have
retained all its pre-upgrade configuration information
164
- Quick Links:
- Network Connection
- Serial Port Connection
Hide quick links:
Advertisement
Table of Contents
