Tripp Lite B092-016 Owner's Manual page 128

Chapter 8: Power and Environment
• Select the Serial & Network: UPS Connections menu. The Managed UPSes section will display all the UPS
connections that have already been configured.
• Click Add UPS
• Enter a UPS Name and Description (optional) and identify if the UPS will be Connected Via USB or over pre-configured
serial port or via HTTP/HTTPS over the preconfigured network Host connection
• Enter the UPS login details. This Username and Password is used by Slaves of this UPS (i.e. other computers that are
drawing power through this UPS) to connect to the Console Server for monitoring of the UPS status and shutdown when
battery power is low. Monitoring will typically be performed using the upsmon client running on the Slave server. See
section 8.5.4 for details on setting up upsmon on Slave servers powered by the UPS
Note: These login credentials are not related to the Users and access privileges you will have configured in Serial &
Networks: Users & Groups
• If you have multiple UPS's and require them to be shut down in a specific order, specify the Shutdown Order for this UPS.
This is a positive whole number, or -1. 0s are shut down first, then 1s, 2s, etc. -1s are not shut down at all. Defaults to 0
128