Power Connection; Power: Console Server Management Switch; Power: Console Server With Poweralert; Power: Console Server - Tripp Lite B092-016 Owner's Manual

Chapter 2: Installation
2.2

Power Connection

2.2.1

Power: Console Server Management Switch

The B096-048/16 Console Server Management Switch has dual universal AC power supplies with auto failover built in. These
power supplies each accept AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and the total power
consumption per Console Server is less than 30W. Two IEC AC power sockets are located at the rear of the metal case, and
these IEC power inlets use conventional IEC AC power cords. A North American power cord is provided by default. Power cords
for other regions are available separately from Tripp Lite.
2.2.2

Power: Console Server with PowerAlert

The standard B092-016 Console Server has a built-in universal auto-switching AC power supply. This power supply accepts AC
input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and the power consumption is less than 40W.
The AC power socket is located at the rear of the B092-016. This power inlet uses a conventional AC power cord. A North
American power cord is provided by default. Power cords for other regions are available separately from Tripp Lite.
2.2.3

Power: Console Server

The B095-004/003 and B094-008-2E-M-F Console Servers each have an external wall-mount power supply. This power
supply accepts AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and the total power consumption
per console server is less than 20W. The DC power socket on the Console Server is located on the side of the metal case
marked PWR.
2.3

Network Connection

The RJ45 10/100 LAN port is located on the rear of the B092-016 Console Server, on the front of the B096-048/016
Console Server Management Switch and on the side panel of the B095-004/003 and B094-008-2E-M-F Console Servers . All
physical connections are made using industry standard Cat5e patch cables (Tripp Lite N001 and N002 series cables). Ensure
you only connect the LAN port to an Ethernet network that supports 10Base-T/100Base-T. For the initial configuration of the
Console Server you must connect a computer to the Console Server's principal network port.
17