Tripp Lite B092-016 Owner's Manual page 151

Chapter 10: Nagios Integration
• Scroll down to Nagios Settings and check Enable Nagios
• Click New Check and select Check Ping. Click check-host-alive
• Click New Check and select Check Permitted TCP. Select Port 3389
• Click New Check and select Check TCP. Select Port 80
• Click New Check and select Check TCP. Select Port 443
• Click Apply
Similarly, configure the serial port to the router to be monitored by Nagios:
• Select Serial Port from the Serial & Network menu
• Locate the serial port that has the router console port attached and click Edit
• Ensure the serial port settings under Common Settings are correct and match the attached router's console port
• Click Console Server Mode and select Logging Level 1
• Check Telnet (SSH access is not required, as SDT Connector is used to secure the otherwise unsecured Telnet connection)
• Scroll down to Nagios Settings and check Enable Nagios
• Check Port Log and Serial Status
• Click Apply
Now set the Console Server to send alerts to the Nagios server
• Select Alerts from the Alerts & Logging menu and click Add Alert
• In Description enter: Administrator connection
• Check Nagios (NSCA)
• In Applicable Ports check the serial port that has the router console port attached. In Applicable Hosts check the IP
address/DNS name of the IIS server
• Click Connection Alert
• Click Apply
Lastly, add a User for the client running SDT Connector:
• Select Users & Groups from the Serial & Network menu
• Click Add User
• In Username, enter: sdtnagiosuser, then enter and confirm a Password
• In Accessible Hosts click the IP address/DNS name of the IIS server. In Accessible Ports click the serial port that has
the router console port attached
• Click Apply
151