Dial-In Configuration; Choosing An Alternate Ssh Client (E.g. Putty) - Tripp Lite B092-016 Owner's Manual

Also some clients are launched in a command line or terminal window. The Telnet client is an
example of this:
 Click OK.
6.2.8

Dial-In Configuration

If the client computer is dialing into Local/Console port on the Console Server, you will need to set up a
dial-in PPP link:
 Configure the Console Server for dial-in access (following the steps in the Configuring for Dial-In
PPP Access section in Chapter 5, Configuring Dial In Access).
 Set up the PPP client software at the remote User computer (following the Set up the remote
Client section in Chapter 5).
Once you have a dial-in PPP connection established, you can then set up the secure SSH tunnel from the
remote Client computer to the Console Server.
6.2.9

Choosing an Alternate SSH Client (e.g. PuTTY)

To set up the secure SSH tunnel from the Client computer to the Console Server, you must install and
launch SSH client software on the Client computer. As described above it is recommended you use the
78