Initial B092-016 Connection - Tripp Lite B092-016 Owner's Manual

Chapter 3: Initial System Configuration
A Welcome screen, which lists initial installation configuration steps, will be displayed. These steps are:
• Change default administration password (System/Administration page. Refer Chapter 3.2)
• Configure the local network settings (System/IP page. Refer Chapter 3.3)
To configure Console Server features:
• Configure serial ports settings (Serial & Network/Serial Port page. Refer Chapter 4)
• Configure user port access (Serial & Network/Users page. Refer Chapter 4)
After completing each of the above steps, you can return to the configuration list by clicking the Tripp Lite logo in the top left corner
of the screen:
Note: If you are not able to connect to the Management Console at 192.168.0.1 or if the default Username / Password were
not accepted then reset your Console Server (refer Chapter 10)
3.1.3

Initial B092-016 connection

You can configure the B092-016 Console Server using a connected computer and browser connection as described in the two
sections above, or you can configure it directly. To do this you will need to connect a console (keyboard, mouse and display) or
a KVM switch directly to its mouse, keyboard and VGA ports. When you initially power on the B092-016, you will be prompted
on your directly connected video console to log in
• Enter the default administration username and password (Username: root Password: default). The B092-016 control
panel will be displayed
• Click the Configure button on the control panel. This will load the Firefox browser and open the B092-016 Management Console
• At the Management Console menu select System: Administration
21