Run Custom Script On Trigger; Send Snmp Trap On Trigger; Send Nagios Event On Trigger; Resolve Actions - Tripp Lite B092-016 Owner's Manual

Chapter 7: Alerts, Automated Response and Logging
7.2.4

Run Custom Script on Trigger

• Click on Run Custom Script as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time
• Create a script file to execute when this action is triggered and enter the Script Executable file name e.g. /etc/config/action.sh
• Set the Script Timeout (i.e. the maximum run-time for the script). Leave as 0 for unlimited.
• Enter any Arguments that are to be passed to the script and click Save New Action
7.2.5

Send SNMP Trap on Trigger

• Click on Send SNMP Trap as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time
Note: The SNMP Trap actions are valid for Serial, Environmental, UPS and Cellular data triggers only
7.2.6

Send Nagios Event on Trigger

• Click on Send Nagios Event as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time
• Edit the Nagios Event Message text to display on the Nagios status screen for the service
• Specify the Nagios Event State (OK, Warning, Critical or Unknown) to return to Nagios for this service
• Click Save New Action
Note: To notify the central Nagios server of Alerts, NSCA must be enabled under System: Nagios and Nagios must be enabled
for each applicable host or port
7.2.7

Resolve Actions

Actions can also be scheduled to be taken when a trigger condition has been resolved:
• For a nominated Auto-Response - with a defined trigger Check Condition - click on Add Resolve Action (e.g. Send Email or
Run Custom Script) to select the action type to be taken
Note: Resolve Actions are configured exactly the same as Trigger Actions except the designated Resolve Actions are all
executed on resolution of the trigger condition and there are no Action Delay Times set
Configure SMTP , SMS, SNMP and/or Nagios service for alert notifications. The Auto-Response facility enables remote alerts to be sent
as Trigger and Resolve Actions. Before such alert notifications can be sent, you must configure the nominated alert service.
118