Tripp Lite B092-016 Owner's Manual page 90

Chapter 6: Secure SSH Tunneling & SDT Connector
• On the Add Service screen, you can click Add as many times as needed to add multiple new port redirections and
associated clients
You may also specify Advanced port redirection options:
• Enter the local address to bind to when creating the local endpoint of the redirection. It is not usually necessary to change
this from "localhost".
• Enter a local TCP port to bind to when creating the local endpoint of the redirection. If this is left blank, a random port will
be selected.
Note: SDT Connector can also tunnel UDP services. SDT Connector tunnels the UDP traffic through the TCP SSH
redirection, so in effect it is a tunnel within a tunnel.
Enter the UDP port on which the service is running on the host. This will also be the local UDP port that SDT Connector binds
as the local endpoint of the tunnel.
Note that for UDP services, you still need to specify a TCP port under General. This will be an arbitrary TCP port that is not in
use on the gateway. An example of this is the SOL Proxy service. It redirects local UDP port 623 to remote UDP port 623 over
the arbitrary TCP port 6667
90