Kit Components: B092-016 Console Server With Poweralert; Kit Components: B095-004-1E And B095-003-1E-M Console Server - Tripp Lite B092-016 Owner's Manual

Chapter 2: Installation
2.1.2

Kit components: B092-016 Console Server with PowerAlert

• Unpack your Console Server and verify you have all the parts shown above, and that they all appear in good working order
• If you are installing your Console Server in a rack, you will need to attach the rack mounting brackets supplied with the
unit, and install the unit in the rack. Take care to heed the Safety Precautions listed earlier
• Proceed to connect your B092-016 to the network, to the serial and USB ports of the controlled devices, to any rack side
LCD console or KVM switch, and to power as outlined below
2.1.3

Kit components: B095-004-1E and B095-003-1E-M Console Server

• Unpack your Console Server kit and verify you have all the parts shown above, and that they all appear in good working
order
• If you are installing your Console Server in a rack you will need to attach the rack mounting brackets supplied with the
unit, and install the unit in the rack. Take care to head the Safety Precautions
• Proceed to connect your Console Server to the network, to the serial ports of the controlled devices, and to power as
outlined below
B092-016
Console Server with PowerAlert
2 x Cable UTP Cat5 blue
Connector
DB9F-RJ45S straight and DB9F-RJ45S cross-over
AC power cable
Quick Start Guide and CD-ROM
B095-004-1E 4-port Console Server with single NIC or B095-003-1E-M 3- port Console
Server with single NIC and modem
2 x Cable UTP Cat5 blue
Connectors
DB9F-RJ45S straight and cross-over
External power supply
Quick Start Guide and CD-ROM
15