Environmental Alerts; Environmental Status - Tripp Lite B092-016 Owner's Manual

Chapter 8: Power and Environment
• Enter a Name and Description for the EMD and select pre-configured serial port that the EMD will be Connected Via
• Provide Labels for each of the two alarms
• Check Log Status and specify the Log Rate (minutes between samples) if you wish the status from this EMD to be
logged. These logs can be views from the Status: Environmental Status screen
• Click Apply
8.3.2

Environmental alerts

You can now set temperature, humidity and probe status alerts using Alerts & Logging: Alerts (refer to Chapter 7)
8.3.3

Environmental status

You can monitor the current status of all of EMDs and their probes
• Select the Status: Environmental Status menu and a table with the summary status of all connected EMD hardware will
be displayed
• Click on View Log or select the Environmental Logs menu and you will be presented with a table and graphical plot of
the log history of the select EMD
135