Using Sdt Connector Client For Dial-In; Set Up Windows Xp/ 2003/Vista/7 Client For Dial-In - Tripp Lite B092-016 Owner's Manual

Chapter 5: Firewall, Failover and Out-of-Band
None With this selection, no username or password authentication is required for dial-in access. This is not
recommended.
PAP Password Authentication Protocol (PAP) is the usual method of user authentication used on the internet:
sending a username and password to a server where they are compared with a table of authorized users. Whilst
most common, PAP is the least secure of the authentication options.
CHAP Challenge-Handshake Authentication Protocol (CHAP) is used to verify a user's name and password for PPP
Internet connections. It is more secure than PAP , the other main authentication protocol.
MSCHAPv2 Microsoft Challenge Handshake Authentication Protocol (MSCHAP) is authentication for PPP connections
between a computer using a Microsoft Windows operating system and a network access server. It is more
secure than PAP or CHAP , and is the only option that also supports data encryption
• Console Servers all support dial-back for additional security. Check the Enable Dial-Back box and enter the phone
number to be called to re-establish an OoB link once a dial-in connection has been logged
5.1.2

Using SDT Connector client for dial-in

Administrators can use their SDT Connector client to set up secure OoB dial-in access to all their remote Console Servers.
With a point and click you can initiate a dial-up connection. Refer to Chapter 6.5.
5.1.3

Set up Windows XP/ 2003/Vista/7 client for dial-in

• Open Network Connections in Control Panel and click the New Connection Wizard
• Select Connect to the Internet and click Next
• On the Getting Ready screen select Set Up My Connection Manually and click Next
• On the Internet Connection screen select Connect Using a Dial-Up Modem and click Next
• Enter a Connection Name (any name you choose) and the dial-up Phone Number that will connect thru to the Console
Server modem
71