Ssh Tunneled Serial Bridging - Tripp Lite B092-016 Owner's Manual

Chapter 15: Advanced Configuration
At this stage, answer yes to accept the key. You should get the following message:
Warning: Permanently added 'remhost,192.168.0.1' (RSA) to the list of known hosts.
You may be prompted for a password, but there is no need to log in - you have received the fingerprint and can press Ctrl-C
to cancel the connection.If the host key changes you will receive the following warning, and not be allowed to connect to the
remote host:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!
@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that the RSA host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
ab:7e:33:bd:85:50:5a:43:0b:e0:bd:43:3f:1c:a5:f8.
Please contact your system administrator.
Add correct host key in /.ssh/known_hosts to get rid of this message.
Offending key in /.ssh/known_hosts:1
RSA host key for remhost has changed and you have requested strict checking.
Host key verification failed.
If the host key has been legitimately changed, it can be removed from the ~/.ssh/known_hosts file and the new fingerprint
added. If it has not changed, this indicates a serious problem that should be investigated immediately.

15.6.7 SSH tunneled serial bridging

You have the option to apply SSH tunneling when two Black Box console servers are configured for serial bridging.
As detailed in Chapter 4, the Server console server is setup in Console Server mode with either RAW or RFC2217 enabled and
the Client console server is set up in Serial Bridging Mode with the Server Address, and Server TCP Port (4000 + port for RAW
or 5000 + port # for RFC2217) specified:
• Select SSH Tunnel when configuring the Serial Bridging Setting
Next you will need to set up SSH keys for each end of the tunnel and upload these keys to the Server and Client console
servers.
@
224