Upgrade Firmware - Tripp Lite B092-016 Owner's Manual

performing this procedure. Do not use a graphite pencil. Depress the button gently twice (within
a 5 second period) while the unit is powered ON.
This will reset the Console Server back to its factory default settings and clear the Console Server's
stored configuration information.
The hard erase will clear all custom settings and
return the unit back to factory default settings (i.e.
the IP address will be reset to 192.168.0.1).
You will be prompted to log in and must enter the
default administration username and
administration password:
Username: root
Password: default

11.2 Upgrade Firmware

Before upgrading, check if you are already running the most current firmware in your Console Server.
Your Console Server will not allow you to upgrade to the same or an earlier version.
The Firmware version is displayed in the header of each page.

 Or select Status: Support Report and note the Firmware Version.
 To upgrade, you must first download the latest firmware image from
http://www.tripplite.com/EN/support/downloads/driver-firmware-downloads.cfm
 Save this downloaded firmware image file on to a system on the same subnet as the Console
Server.
 Also download and read the release_notes.txt for the latest information.
 To then upload the firmware image file to your Console Server, select System: Firmware.
150