Table of Contents
Advertisement
SNMP Solo
Upload Firmware
CAUTION: The firmware upload has already been accomplished at the
factory. Before you proceed with this option, you must
contact our technical support team for assistance.
This option supports upgrades to the firmware program when
they become available. Should an upgrade be available, call our
technical support team for assistance with the upgrade.
If you inadvertently use this option, your system suspends
(locks). To restart, unplug the power supply from the SNMP
Solo, and re-connect the power supply to the SNMP Solo.
Exit Without Saving
This options lets you quit the program without saving any of
your configuration settings. To exit, type 0 (zero).
22
Configuration
Advertisement
Table of Contents
