Click Finish to close the Found New Hardware Wizard.
18. To verify that your Adapter has been installed properly, click Start>Settings>Control
Panel>System>Hardware>Device Manager. The USB to IrDA Adapter should appear under both
Infrared Devices and Modems (click on the + sign to display all configured modems). See the
example screen below.
NOTE: If the Adapter doesn't show up under Modems, move it away from the meter for a minute
and then position it pointing at the IrDA, again.
19. Double-click on the Standard Modem over IR link (this is the USB to IrDA Adapter). You will
see the Properties screen for the Adapter.
E Electro Industries/Gauge Tech
Doc# E145721
E-7