Table of Contents
Advertisement
7.3.3.6: Configure Communication Port Setting
Push the DOWN Button to scroll all the parameters in Configuration Mode: Scroll, CT, PT,
Connection (Cnct) and Port. The 'Active" parameter is in the A Screen and is flashing.
Push ENTER when PORT is the 'Active' parameter and the Port screens appear for your meter.
To program the PORT screens, see section 7.3.3.2.
The possible PORT configurations include:
Address (Adr) (Three digit number)
BAUD (bAUd) 9600, 19,200, 38,400, 57,600
Protocol (Prot) DNP 3.0 (dnP)
Modbus (Mod) RTU (rtU)
Modbus (Mod) ASCII (ASCI)
The first PORT screen is Address (Adr).
The current Address appears on the screen.
Follow the Programming steps in section 7.3.3.2 to change the Address.
Baud Rate (bAUd) appears next. The current Baud Rate appears on the screen. To change the
setting, follow the Programming steps in section 7.3.3.2. Possible screens appear below.
Protocol (Prot) appears next. The current Protocol appears on the screen. To change the
setting, follow the Programming steps in section 7.3.3.2. Possible screens appear below.
Baud Rate 9600
Modbus RTU Protocol
Push ENTER and the screen scrolls through the other CFG parameters.
Push DOWN or RIGHT and the Password screen appears (see section 7.3.2.1).
Push MENU and you will return to the MAIN MENU.
e
Electro Industries/GaugeTech
Baud Rate 19,200
Modbus ASCII Protocol
Doc # E145701
Baud Rate 38,400
DNP 3.0 Protocol
Address 005
Baud Rate 57,600
7-9
Hide quick links:
Advertisement
Table of Contents
