Activating A Programme Position For An External Decoder - Grundig GV 470 S VPT User Manual

1. Connecting and Setting Up
Additional settings for point 1c on page 4.
After these settings, continue operation at point 1d.
Press these buttons on the remote
control
Starting search
(blue)
Fine tuning the picture (if necessary)
(blue)
or
Activating a programme position for
an external decoder
(blue)
(blue)
Activating the SECAM colour norm
(blue)
Changes and Additional Features ...
You will see this on your TV screen
GRUNDIG
TEXT-PROGRAMMING
TV Station Table
Prog. Channel
10 31
ATS : Start search
n : Decoder ON/OFF
PAL / : Selecting SECAM
< > : Fine Tuning
OK : Confirm
n : TV picture
Deviation +2
< > : Fine Tuning
OK : confirming
GRUNDIG
TEXT-PROGRAMMING
TV Station Table
Prog. Channel
10 C+ S 20
ATS : Start search
n : Decoder ON/OFF
PAL / : Selecting SECAM
< > : Fine Tuning
OK : Confirm
n : TV picture
GRUNDIG
TEXT-PROGRAMMING
TV Station Table
Prog. Channel
10 31 SEC
ATS : Start search
n : Decoder ON/OFF
PAL / : Selecting SECAM
< > : Fine Tuning
OK : Confirm
n : TV picture
6
Explanations
The search function searches for the
"new" television channel.
Press the
Ident
on the current TV programme.
If the desired TV programme was not
found, restart the search function by
pressing
This correction is only required if the
picture quality is unsatisfactory.
The current TV programme appears
when you keep the the buttons depres-
sed.
Pictures contours become softer, or
harder.
The decoder must be connected to
the socket DECODER A2.
Ident
» C + « appears after the programme
position.
Press the
on the current TV programme.
» SEC « appears after the channel
number and in the recorder´s display.
Press the
Ident
on the current TV programme.
(green) button to check
button.
(green) button to check
(green) button to check