Grundig GV 470 S VPT User Manual page 68

2. Record Programming
Interrupting the record stand-by mode of the
recorder
If you have programmed TIMER positions but wish to use the
recorder while it is in the record stand-by mode, or you want
to terminate the TIMER recording, then:
press the button on the recorder to eject the cassette,
or
press the (TIMER) button.
ON/OFF
The TIMER data items in the dislay on the recorder disappear,
the TIMER symbol flashes, and the data remain stored in
memory.
The record stand-by mode of the recorder is now interrup-
ted.
Now select the desired function.
Reactivating the record stand-by mode of the
recorder
Insert a cassette with sufficient playing time, wait until the
tape measurement is completed, and then press the
(TIMER) button.
The remaining playing time briefly appears in the recorder´s
display.
The recorder is once again in the record stand-by mode and
the TIMER recordings will be made at the programmed times.
If » CASS N
0
=== « appears in the display of the recorder
instead of the cassette number, you must enter the number if
you want to archive the cassette.
Enter the cassette number as a three digit number with the
numeric buttons ... and confirm with the
Variant 3
ON/OFF
button.
14