Entering A Stop Time; Interrupting Recording (Pause); Terminating Recording Immediately; Assembling Recordings With Clean Transitions (Perfect Assembly Editing) - Grundig GV 470 S VPT User Manual

6. Immediate Recording

Entering a Stop Time

If a stop time is not entered, after a short time the display
switches to the display of hours/minutes and the recorder
continues to record until it reaches the end of the tape.
When it reaches the end, the recorder automatically
rewinds the tape to the beginning and then switches to
stop.
There are two methods of entering the stop time:
Entering the stop time to the exact minute;
Entering the stop time in 30-minute steps.
Entering the stop time to the exact minute
Enter the stop time as a four-digit number with the numeric
buttons ... and confirm by pressing the
In the display will see the remaining playing time, then the
elapsed laying time, the programme position and the station
identification abbreviation.
Entering the stop time in 30-minute steps
Enter the desired stop time by repeaedly pressing the
buttons on the remote control or the
RECORD
buttons on the recorder (max. 20 times = 600
minutes).
Changing the stop time
If you wish to change the stop time while recording, press
both of the buttons on remote control or the
RECORD
buttons on the recorder, enter the desired stop time
with the numeric buttons
pressing the button, or press both of the
OK
buttons on the remote control or both of the
tons on the recorder until the desired stop time is displayed.
Interrupting the Recording (Pause)
Press the button during playback.
» II « also appears in the display of the recorder.
Press the button to continue recording.
» II « disappears from the display.
The recording-pause function is limited to a certain time.
After this time, the recorder switches to stop.
button.
OK
... and confirm this entry by
RECORD
but-

Terminating Recording Immediately

Press the button to conclude recording.
Recording a Title Line
You can record a title line. Creating a title line is described in
the second part of the operating instructions on pages 53 and
54.
Press the button before or during recording to add the
title line to the recording.
To suppress the title line, press the
Assembling Recordings with Clean Transitions
(Perfect Assembly Editing)
During playback, locate the tape position where you wish to
join the new recording, then press the
Switch the recorder to recording-pause by pressing the two
buttons on the remote control, or press the
RECORD
buttons on the recorder, and enter the desired pro-
gramme as one or two digits with the numeric buttons
... .
Start the new recording by pressing the
When you play the assembled recordings back, you will see
smooth transitions no flaws. This is called Perfect Assemble
Insert.
31
button again.
button.
button.