Selecting A Programme Position; Selecting Long-Play Recording Mode; Starting Recording - Grundig GV 470 S VPT User Manual

6. Immediate Recording
Preparation
Switch the TV set on.
Select the AV programme position for the recorder on the TV
set. This serves as a monitor for checking.
Open the front cover of the recorder.
Insert a cassette with sufficient playing time which is not pro-
tected against recording.
The recorder automatically recognizes VHS and S-VHS cas-
settes.
If you want to record the VHS format on an S-VHS cassette,
w
press the button (
S- VHS
Comments on the archive system
If » CASS N
O
- --- « appears in the recorder´s display after a
cassette is inserted amd measured, you must enter the cas-
sette number (see page 23).
If a cassette is already inseted, you can call up its number by
pressing the button. When you start the cassette, the
recorder automatically stores in the archive the starting and
stopping point of the tape, the date, » DIVERSE « as the cate-
gory, the station identification abbreviation, and the starting
time, all as title of the cassette.
When the cassette is finished, you can change the title and
category of the cassette as required (see the section "Infor-
mation on Cassette Contents...." in the second part of the
operating instructions, page 39).
Selecting a Programme Position – Directly
TV stations/cable TV stations
Programme positions which are not occupied by a TV sta-
tion cannot be selected.
Select the desired TV station on the programme positions 1
to 9 with the numeric buttons
or
for TV stations on the programme positions 10 to 60, first
enter the tens position, and then, within 3 seconds, the units
positon.
You will see the TV station you selected on the TV screen.
goes out in the display).
... ,
TV programmes from a satellite receiver
Press the button and then select the desired TV station
on the programme positions 1 to 9 with the numeric buttons
... ,
or
press the button, and then for TV stations on the pro-
gramme positions 10 to 99, first enter the tens position, and
then, within 3 seconds, the units position.
You will see the TV station you selected on the TV screen.

Selecting Long-Play Recording Mode

Press the button to double the cassette playing time.
» « appears in the display of the recorder.
LP

Starting Recording

Simultaneously press the
remote control
or
simultaneously press the
Recording is started; this is indicated in the recorder´s dis-
play by, for example:
BBC I I
PROG
SECPAL
S A T
AUTO-TRACKING
TIMER
w
LP EP NTSC
BBC I
= station identification abbreviation
PROG I
= programme position 1 selected
START 2O: 00
= current clock time
STOP - - : - -
= this flashing prompts you to enter the
stop time
l
= indicates active recording function
30
buttons on the
RECORD
buttons on the recorder.
20:00 - -:--
START STOP
C + VPS
DATE PDC
1 2
II
l
NICAM
MAN