The Continuous Mode Function Of The Recorder; The Electronic Combination Lock - Grundig GV 470 S VPT User Manual

4. Special Functions

The Continuous Mode Function of the Recorder

Your recorder can:
Continuously record from different signal sources, for exam-
ple, from TV broadcasts or from units that are connected to a
corresponding socket.
Play back continuously.
Preparation for the continuous mode functions
For continuous recording, insert a cassette with sufficient
playing time.
For continuous playback, insert the cassette to be played.
Press the J button to start playback.
Press the ` button when you have located the position
where playback should end.
Press the Z button, the numeric buttons
then the ¶ button.
OK
You will see this in the display of the recorder: » C O N T . «
Now you can select the different functions.
Continuous record mode function
Select the desired programme source:
1
Use the numeric buttons
or
if the picture/sound source is connected to the EURO-AV A1
button until » A I « appears in the dis-
a
socket, press the
play of the recorder.
or
if the picture/sound source is connected to the VIDEO IN/CV
and L AUDIO IN R sockets, press the
appears in the display of the recorder.
or
if the picture/sound source is connected to the S-VHS IN and
L AUDIO R sockets, press the
appears in the display of the recorder.
Start the recording by pressing both of the
buttons.
The recorder records all the way to the end of the tape and
then rewinds to the beginning of the tape where it begins
recording again.
Continuous playback mode function
Press the J button to activate this function.
The tape is rewound all the way to the beginning where it
starts playback.
The recorder plays back all the way to the position you
marked and then rewinds the tape back to the beginning and
starts the playback again.
Terminating the continuous mode functions
Press the > button on the recorder.
8 5 0 1
, and
0
... to select a TV station
button until » C V «
a
button until » S I «
a
M ;
RECORD

The Electronic Combination Lock

Your recorder is equipped with an electronic combination
lock.
This allows you to lock all functions of the recorder. Even a
cassette which is inserted after the lock has been activated
cannot be removed until you have unlocked the recorder.
You can lock and unlock your recorder quite simply with a
code number of one to four digits.
Write your personal code number in the boxes below.
Locking the recorder
Prepare to enter the code number by first pressing the
button and then the D
You will see this in the display of the recorder: » K EY «.
Enter a code number of one to four digits with the numbered
buttons 1 ... 0 .
Your personal code number
Store the code number in the memory with the the
ton.
» LOCK ED « and the clock time appear in the display of the
recorder.
The recorder is now locked.
If you insert a cassette now, it cannot be removed.
If you forget or misplace your code number, your dealer will
be able to help you.
Unlocking the recorder
D
Press the button, enter your personal code number with
the numeric buttons 1
ton.
» LOCK ED « disappears from the display of the recorder and
the clock time appears.
The recorder is now unlocked and you can select any desired
function.
73
button.
¶
OK
... 0 , and then press the ¶
OK
`
but-
but-