4. Special Functions
Synchro Edit Function
You can use this function to record over old recordings and
splice without losing scenes.
The camcorder is controlled by your recorder via a cable
connection.
You can also control the camcorder drive functions with the
control elements of your recorder (GV 470).
Camcorders suitable for this function are those equipped with
a 5-pin control socket as well as those equipped with a
2.5 mm ∅ socket.
Connecting
Open the front cover of the recorder.
Picture signal
Connect the VIDEO IN signal or the S-VHS IN socket of your
recorder with the corresponding picture signal socket of the
camcorder.
Sound signal
For camcorders with monotone sound, connect one of the L
AUDIO R IN sockets with the sound signal socket of the cam-
corder.
For camcorders with stereo sound, connect the L AUDIO R IN
sockets with the sound signal socket of the camcorder.
Sound signal L/R
Picture signal
Control signal
For camcorders with a 5-pin socket, connect the SYNCHRO
EDIT 2 socket with the control signal socket of the camcor-
der.
For camcorders with a 2.5mm ∅ socket, connect the
SYNCHRO EDIT 1 socket with the control signal socket of the
camcorder.
63
SYNCHRO EDIT
1
2
L
R
AUDIO IN
VIDEO IN
y
S-VHS
MIC
S-VHS
INSERT
DUBBING
y
MANUAL
EW/ED
OK
CHECK
SET
TIMER
CL
ON/OF