Grundig GV 470 S VPT User Manual page 76

2. Record Programming
Press these buttons on the remote
control
13. Programming the next broadcast
or
a) Manually b) With VPT
Refer to VPT
Continue pro-
programming
gramming with
in the first sec-
point 3, page
tion of the ope-
16.
rating instruc-
tions on page
36.
Modifying and Supplementing Recording Data
(necessary for point 12 of the programming example)
Correcting TIMER data
Select the desired timer with the
Continue to press or
place of the data to be corrected.
» Overwrite « the data in question with the numeric buttons
and confirm with the remaining timer data with the
...
button.
You can then programme the next broadcast.
Recording without VPS/PDC
Select the desired timer with the
Press the button once; the cursor
the stop time.
Erase the VPS/PDC with the
The cursor jumps to the first figure of the start time.
If the start time and the VPS/PDC time differ, enter a new
start time with the numeric buttons
remaining data with the
You can then programme the next broadcast.
You will see this on your TV screen
or button.
until the cursor is at the
or button.
is positioned after
button (blue).
and confirm the
...
button.
Variant 4
Doubling the cassette recording capacity
Select the desired timer with the
Press the button once; the cursor
the stop time.
Select long-play mode with the
play: L), then press
You can then programme the next broadcast.
Selecting Simulcast/Parallel sound
Select the desired timer with the
Press the button once; the cursor
the stop time.
Select Simulcast mode with the
play: S), then press
You can then programme the next broadcast.
22
Explanations
or button.
is positioned after
button (additional dis-
.
or button.
is positioned after
button (additional dis-
.