Tuning The Tv Set To The Recorder; Connecting And Setting Up - Grundig GV 470 S VPT User Manual

2. Connecting and Setting Up

Tuning the TV set to the Recorder

SYNCHRO EDIT
1 2
L AUDIO IN R VIDEO IN
y
S-VHS
MIC
S-VHS
INSERT DUBBING
y
MANUAL
EW/ED OK
CHECK SET
TIMER
CL
ON/OF
GRUNDIG CTI TEST PATTERN
No reception of Programme 01
MASTER
SLAVE
EDIT
GRUNDIG
PATTERN
Your TV set receives programmes from different stations on
certain channels.
You recorder also transmits on such a channel (between
channels 30 and 40 + 2 channels in the UHF band) to which
the TV set must now be tuned.
So that you can find this channel, the recorder is fitted with a
"transmitter" which generates a test pattern.
This adjustment is not necessary if the recorder and the TV
set are connected with a EURO-AV cable.
Preparation
Switch the TV set on.
Select the AV programme position for the recorder on the TV
set.
Remove the aerial cable from the socket –
There should be no cassette in the recorder.
Open the front cover of the recorder (see illustration).
Tuning
Switch to the colour test pattern by pressing the
(see illustration to the left).
After a short period of time, the recorder "transmits" the test
pattern.
» TEST « appears in the display of the recorder.
Search for the recorder´s test pattern on the TV set – in the
UHF band between the channels 30 and 40 + 2 – and store it
in the memory.
How this is done is explained in the operating instructions for
the TV set.
If you have connected your recorder to a 100 Hz technolo-
gy TV set and the colour test pattern jumps or appears
unsteady, you must tune the recorder.
Press the button on the remote control, the numeric
buttons and then the
» O N « appears briefly in the display of the recorder.
If you connect the recorder to a conventional 50 Hz tech-
nology TV set after making this adjustment, press the
button, the numeric buttons
button.
» O F F « appears briefly in the display of the recorder.
Insert the aerial cable plug into the aerial socket –
recorder.
If the picture quality is good, complete tuning by pressing the
button on the recorder.
If the picture quality is poor, proceed as described in the
chapter on the next page.
10
– of the recorder.
II
button
button.
and the
– of the
II